How to solve the problem of how to solve the crease phenomenon when the fabric is sewn

The fabric itself has a great influence on the sewing condition. For example, some well-organized fabrics, finished fabrics , and thin and non-stretch fabrics.


When the sewing direction is parallel to the warp direction of the fabrics, the embedded stitches will force the warp yarns away from the original position, because each stitch will push the warp yarns away, and the deviation caused by multi-needle accumulation will follow the seams. The body of the cloth shrinks to cause wrinkling of the seam, and when the sewing direction is parallel to the weft direction of these fabrics, wrinkling is generally less. Experience has shown that diagonal seams in the diagonal corners do not wrinkle. Most fabrics, provided that the seams are at a 15 degree angle of latitude or longitude, are sufficient to avoid wrinkling. Therefore, you can consider using oblique cutting mode. If necessary, apply a smoothing agent to the fabric.


In addition, fine needles should be used as much as possible. Since the fine needle can significantly reduce the resistance generated when passing through the fabric, there is an effect of preventing the crease from wrinkling, and it is necessary to pay attention to changing the new needle frequently.


When using a synthetic sewing thread, the tension of the thread must be carefully determined and the tension should be adjusted to a minimum. The tension of the bobbin thread must be adjusted so that when the free end of the thread is pulled up, the bobbin and bobbin of the bobbin thread slowly slide downwards, the tension between the bobbin thread and the bobbin thread must be the same, so that they just interweave between the two layers of fabric. If the synthetic sewing thread is sewn into the fabric with too much tension, it will automatically shrink to relieve this tension. This phenomenon will shrink the seam along the seam and cause the seam to wrinkle.


Also note that the friction between the upper fabric and the presser foot forces the lower fabric on the feed dog to move more quickly and cause the seams to wrinkle. As long as the pressure of the presser foot is lowered as much as possible, and the feeding teeth (conveyor) with fine teeth are used at the same time to reduce the speed of rotation of the sewing machine, wrinkles due to feeding can be avoided, and the fundamental method to completely solve this problem is to use Differential feeding or needle feed mechanism sewing machine.


For more content, please follow this site

Cord Embroidery Fabric

The Cord Embroidery Fabric is normally made on poly mesh fabric(mono mesh.poly korean mesh).The products is in soft handfeeling and suitable for children dress.evening party dress .garment dress etc.


Forest Green Cord Embroidery Fabric For Dresses


We always shipp them to American.European and Turkey etc.Most of these designs are designed by ourselves and you will see that it't very popular and pretty which is really popular in the market.


Cord Embroidery Fabric

Cord Lace Fabric,Metallic Cord Embroidery Fabric,Rayon Cord Embroidery Fabric,Poly Cord Embroidery Fabric

SHAOXING MINGHEE EMBROIDERY CO,LTD , https://www.zjchemicallacefabric.com

Posted on