How to affix glass doors and windows?

[China Glass Net] As glass doors and windows are popular among consumers, the film for glass doors and windows also makes consumers more enthusiastic. At present, many consumers in the market reflect the general protection of personal privacy in the future to film glass doors and windows. So how much do you know about the film of glass doors and windows?

玻璃网新闻图片

1, familiar with tools, good size

Construction points: The inspection tool is intact, and the tools prepared by the same side of the window before the film is applied should include at least four scrapers, watering cans, utility knives, and rulers, and carefully check whether the tool is flat, smooth, and has a gap; After that, we measure the length and width of the window. When we measure the size of the window, we must start from the same side of the window.

2, film

Construction points: soft cloth on the mat, the edge of the film is aligned with the center line, and the size is 5-8mm smaller than the glass.

After taking out the size and quantity of the film inspection film, place a small blanket or soft cloth underneath to avoid scratching the floor. When cutting, align the film edge with the center line and cut it. The size of the cut is 5-8mm smaller than the glass size. The back is on the membrane.

3, cleaning the glass

Construction points: more water spray, several times, clean, no dust, no dust, no sand glass must be cleaned, this is very important for the effect of the film, wash the glass thoroughly clean. Spray more water, with film Scrape a few times to make the glass free of dust, dust, and sand. After cleaning the glass, spray a layer of water.

4, the upper film

Construction points: Spray the lubricating fluid to reduce the viscosity of the adhesive layer, first cross the cross, first the middle and the back, the scraping film is divided into two layers, one layer is colorless and transparent, called protective film, and the other layer is called adhesive film. . First spray the lubricating liquid before the film to reduce the viscosity of the adhesive layer, then peel the protective film on the side of the film, adjust the position of the film on the glass window, the action is to first cross, then wipe the film from the middle to the sides, fix the film, put The bubbles are driven out from both sides, and the force should be light, avoiding excessive force and scratching the film.

5, scraping the film to catch water

Construction points: small towel absorbs water, trims corners, dry rag wipes the film on the film and also sprays the layer of lubricating liquid, separating the protective film and the film, the direction of action is the same as the previous step, vigorously scraping away the water, sucking it out with a small towel Moisture, after the corners are not scraped, the protective film is removed and the film is finished. When all windows are filmed, apply a small amount of detergent to remove other residues. Wipe with a dry rag to make the window smooth and bright.

Women's Clothing

Fashion Ladies Cotton Blouse,Women'S Clothing,V-Neck Viscose Blouse,Custom Ladies Jumpsuit

Zhejiang Shaoxing Yongmei Import & Export Co., Ltd. , https://www.sxymgarment.com

Posted on